Gymnova
O’Jump
Educ’Gym
Eurotramp
Brick
_1.png)
.png)
Ref : 2040
CONTROL TENSIOMETER FOR GYMNASTICS CABLE SYSTEMS - FIG
Specially adapted to measure the tension of gymnastic apparatus cables. This FIG approved tensiometer is a measuring device for asymmetric bars, high bars and ring frames.
This easy to use tensiometer with measurement button and digital display allows gymnasts to adapt the tension of the cables of the apparatus according to their needs in competition as well as in training.
A real control tool, it will also allow you to check the tension of the cables on a regular basis so that the gymnasts can train in the best conditions. For the safety of the gymnasts, the tension of the cables must be between 1000 to 5000 (N) and when the tension becomes too low or too high a red light signal will appear.
It has a charge indicator to view the battery level and an “automatic shutdown” function turns the screen off after a few seconds to save energy.
The charging time of the tensiometer with the power cable + charger (not supplied) is 4 to 6 hours. Once charged, the autonomy of the tensiometer varies from several weeks to a few months (depending on use).
DELIVERED WITH A TRANSPORT CASE CONTAINING:
- 1 Tensiometer;
- 2 quick links;
- 3 AA/LR6 rechargeable batteries (2850 mAh);
- 1 set of instructions for assembly and use.
This easy to use tensiometer with measurement button and digital display allows gymnasts to adapt the tension of the cables of the apparatus according to their needs in competition as well as in training.
A real control tool, it will also allow you to check the tension of the cables on a regular basis so that the gymnasts can train in the best conditions. For the safety of the gymnasts, the tension of the cables must be between 1000 to 5000 (N) and when the tension becomes too low or too high a red light signal will appear.
It has a charge indicator to view the battery level and an “automatic shutdown” function turns the screen off after a few seconds to save energy.
The charging time of the tensiometer with the power cable + charger (not supplied) is 4 to 6 hours. Once charged, the autonomy of the tensiometer varies from several weeks to a few months (depending on use).
DELIVERED WITH A TRANSPORT CASE CONTAINING:
- 1 Tensiometer;
- 2 quick links;
- 3 AA/LR6 rechargeable batteries (2850 mAh);
- 1 set of instructions for assembly and use.
Only by quotation
Technical features
THE TENSIOMETER IS PROVIDED TO BE ASSEMBLED ON STANDARD CABLE SET FOR GYMNOVA APPARATUS FOLLOWING:
References: 3230, 3240, 3270D, 3020F, 3030, 3120H, 3700D, and 3770F.
To equip your asymmetric and high bars with short cables, contact us.
The tensiometer can be charged by any commercial USB Type-C charger delivering a maximum voltage of 5V DC and a current between 1 and 2A (not supplied). Once charged, the autonomy of the blood pressure monitor varies from several weeks to a few months (depending on use).
5
year
Ref : 2040
CONTROL TENSIOMETER FOR GYMNASTICS CABLE SYSTEMS - FIG
